| |
Manufacturer of weed control burners
ENVO-DAN
is a manufacturer of weed control burners for ecological and organic
farming. ENVO-DAN weed control burners can be used on gravelled and tiled areas. Further
the weed control burners can be used in orchards and to the burning of potato tops.
The advantages of ENVO-DAN weed control burners are many. ENVO-DAN is a manufacturer of weed control burners that does have ignition and pilot flames controlled from driver’s seat by an electronic control box. .
ENVO-DAN weed control burners are safe. An electronic flame control cuts off the propane supply, if a loss of pilot flames
occur. The insulated flame shield protects the flames against wind, prevents loss of heat and secures low energy consumption.
The adjustable wheels or runners can be adapted according to the distance between
rows.
ENVO-DAN is a manufacturer of weed control burners that also can be used in overgrown areas, such as parking areas and pavement, narrow paths and beside bushes and between trees.
This means that ENVO-DAN weed control burners are very user-friendly.
ENVO-DAN weed control burners are manufactured in accordance with Danish authority regulations and according to European CE organisation.
ENVO-DAN
is a Danish company. ENVO-DAN
is a manufacturer of weed
burners. ENVO-DAN offer several natural gas burner systems for weed control both on the farm and in the city.
Farmers often use burning to control weed either before seeding the field, before sprouting, or between rows. Such a system reduces dramatically the amount of chemicals on the field. Burning can also be used to top potatoes. Again, when used in place of herbicides, burning can result in an organic crop and can protect all of us from the yet unknown long-term effects of chemicals.
It is important that weed plants are not burnt black, but rather scorched.
Many municipalities and counties use burning to control weeds on public bicycle paths, sidewalks, and on the side of roads. Many people are sensitive to chemicals, and this prevents contact in public spaces. Burning is a good solution for graveyards. Easy to use, burning can preserve the natural aspects of graveyard while keeping the area clear of nuisance
weeds.
Important rules from the manufacturer
of weed control burners
It is very important that the weed plants are not burnt scorched (not black). It is
easy to control this by using the "fingerpress" method. The method is to press the
leaf or blade between your fingers and then release pressure. If a mark remains, the weed is properly scorched.
Remember: If one burns the plants black, the soil is damaged when the ash is incorporated into the
ground.
Two important rules:
1. it’s impossible to see directly by the naked eye after flaming if the weeds have been properly treated; they will appear to be green and healthy.
2. It's necessary to flame during windless weather, and not on a hot sunny day in the summer, as is often the case for pesticide use. Flaming/scorching is done as early as February/March and ends in October/November when the plants are growing,
as long as the average temperature is over 4°C. By doing this one can best affect the weeds at the time they are most vulnerable to
scorching.
|
|
